Centra tokarsko-frezarskie – CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3 Y3

Lokalizacja przedmiotu

Producent

Numer maszyny

Opis

Details:
turning diameter: max. 320 mm
turning length: max. 810 mm
control: MSX 701 IV / MAPPS IV
greates pass round over bed: 800 mm
Swing dia. over traverse guideway: 800 mm
distance between spindles: 1.130 mm
standard turning dia.: 200 mm
Number of revolutions: max. 5.000 min / -1
power capacity - main spindel: 25 / 22 kW
max. Torque: 358 Nm
spindle diameter in front bearing: 120 mm
spindle bore: 73 mm
Bar feed: max. 65 mm
C-Axis: 0,001 °
spindle nose: JIS A2-6
Number of revolutions: max. 5.000 min / -1
power capacity - Sub spindle: 25 / 22 kW
max. Torque: 358 Nm
spindle diameter in front bearing: 120 mm
spindle bore: 73 mm
Bar feed: 65 mm
C-Axis: 0,001 °
spindle nose: JIS A2-6
chucking diameter: 210 mm
number of toolpositions: 16 pos.
Number of driven toolspositions: 16 pos.
Spindle speed - driven tool stations: max. 6.000 min -1
power capacity - driven tool-stations: 7,5 / 5,5 kW
Y - Axis: 110 (+65 / -45) mm
Shank diameter: 20 x 20 mm
Drill shank diameter: 32 mm
turret change time: 0,18 sec.
number of toolpositions: 16 pos.
Number of driven toolspositions: 16 pos.
Spindle speed - driven tool stations: max. 6.000 min -1
power capacity - driven tool-stations: 7,5 / 5,5 kW
Y - Axis: 110 (+45 / -65) mm
Shank diameter: 20 x 20 mm
Drill shank diameter: 32 mm
turret change time: 0,18 sec.
number of toolpositions: 16 pos.
Number of driven toolspositions: 16 pos.
Spindle speed - driven tool stations: max. 6.000 min -1
power capacity - driven tool-stations: 7,5 / 5,5 kW
Y - Travel: 110 (+65 / -45) mm
Shank diameter: 20 x 20 mm
Drill shank diameter: 32 mm
turret change time: 0,18 sec.
x-travel: 1 / 2 / 3: 210 mm
y-travel: 1 / 2 / 3: 110 mm
z-travel: 1: 300 (+100) mm
z-travel: 2: 810 mm
z-travel: 3: 300 (+100) mm
Traverses Subspindle: 920 mm
rapid traverse ( X / Y / Z ): 1: 30 / 20 / 50 m / min
rapid traverse ( X / Y / Z ): 2: 30 / 16 / 50 m / min
rapid traverse ( X / Y / Z ): 3: 30 / 20 / 50 m / min
Tipp feed: 0 - 5.000 mm / min
total power requirement: 102 kVA
weight of the machine ca.: 9,5 t
dimensions of the machine ca.: 15,5 x 5,5 x 4,0 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: Knoll KF200 / 1400 70 bar
triple signal light:
C-axis:
Y-axis:
Subspindle:
Turret: 3x
gantry loader: Promot EPL20 NC
paper band filter:
tool holders:
driven tools:
tool setter: 2x
steady rest: SMW - SLU-1Z (on Turret)
exhaust fan: ELBARON - EBR 5000 D

Warunek

Rok budowy

Maszyna pod napięciem